_edited.png){kind=logo}
No appointment needed
Learn how to apply our lashes like a Pro
Cluster Lashes
.jpg)
Learn How
.png)
Lash Removal
Learn How
STEP BY STEP
01
Using our lash applicator, gently lift the lash from the tray, taking care not to touch the adhesive strip
02
Place the lash underneath your natural lashes, positioning it at the base of the lash line for the most natural finish. Make sure to place the lash 1-2mm from your eye. Avoid placing the lash directly onto the skin.
03
With your applicator gently crimp the base of the lash to your natural lashes. This helps activate the adhesive and ensures a secure hold. Repeat on the other eye.
Note
AVOID touching the adhesive with your fingers or tweezers during application, as this can affect adhesion.
Cluster Lashes
Longer and stronger hold.
Step 1
Using your Blink Empire Bond, brush a thin, even layer onto your natural lashes from underneath, focusing only on the area where the base of the cluster will sit. Ensure the lash is place 1-2mm away from your eyeball.
Step 2
Gently remove a lash cluster from the tray using tweezers. Apply a light layer of bond to the base of the cluster only. Avoid overloading the lash with adhesive.
Step 3
Once both surfaces are tacky, position the cluster underneath your natural lashes, placing it close to the lash line without touching the skin.
Step 4
Using your tweezers, softly press and fuse the cluster into your natural lashes to ensure a seamless blend. Continue this process in small sections until your desired look is achieved on both eyes.
Step 5
Once all clusters are applied, gently dab the Sealer onto the areas where the bond was used. This step locks in the lashes, eliminates tackiness, and helps extend wear time. Avoid brushing the sealer through the full length of the clusters.
Why You'll Love our Lashes
One Step Press Ons
-
Latex free
-
Premium PBT fibers for long-lasting curl
-
Lasts 5-7 days
-
3 Styles to choose from
-
Pre-glued lashes require no adhesive
-
Customise according to your style
.png)
Cluster Lashes
-
Premium PBT fibers for long-lasting curl
-
Lasts 5-7 days
-
4 Styles to choose from (Tres Chic, Haute Couture, Au Natural, and Full Volume)
-
Each box includes 30 lashes, allowing for approximately 3–4 full sets depending on application. With proper care, clusters can be reused up to 5 times.
-
Customise according to your style
.png)
Removing Your Lashes
-
​Apply Blink Empire Lash Remover directly to the areas where the bond and sealer were applied.
-
​Allow the remover to sit briefly until the adhesive begins to break down.​
-
As the lashes loosen, gently slide the clusters away from the lash line using a downward motion. Never pull or tug.
Once removed, place the clusters into a lash wash bowl or onto a cotton pad.​
​
-
Dispense half a pump of Blink Empire Lash Shampoo onto a cleansing brush and gently cleanse the lashes to remove adhesive and makeup residue.
-
Rinse thoroughly with water.​
-
Use a disposable mascara wand if needed to remove any remaining product. Allow lashes to dry completely on a cotton pad before placing them back into their original tray.​
-
Reusable up to 5 times with proper care.
Cleaning & Re-Use
